You have no items in your shopping cart.
- Availability & Price
- Search SKU
Filter by attributes
- Application
- Brand
- Division
- Division
- End Cap Configuration
- Filter Construction
- Filter Material
- For Fluid Type
- Industry
- Length
Recently viewed products
High Flow Sterilizing Grade Air and Gas Filters - HIGH FLOW TETPOR II
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 and in gas through full retention to an aerosol challenge of MS2 phage. This ensures the filter will guarantee the sterility of your process in the worst-case scenario where the filter may be subjected to bulk liquid due to a process problem.
Subtle changes to the structure of the hydrophobic PTFE have also resulted in the production of an extremely robust product, now validated for 225 steam sterilization cycles. The combination of non-woven supports upstream of the membrane and an expanded net layer downstream provides increased protection and service life while guaranteeing zero fibre shedding into the process.
HIGH FLOW TETPOR II is suitable for all sterile gas applications including fermentation inlet and off-gas streams, venting, lyophilisers, autoclave vacuum breaks and blow-fill-seal equipment as well as the provision of particle-free air within the electronics industry.
Features and Benefits:
• Steam sterilizable up to 225 cycles at 142°C (287.6°F)
• Unrivalled flow rates combined with low pressure drops
• Fully validated to ASTM 838-05 for liquid bacterial challenge
• Fully validated to aerosol and viral challenge
• Integrity testable by all methods including water intrusion test
Read More...Subtle changes to the structure of the hydrophobic PTFE have also resulted in the production of an extremely robust product, now validated for 225 steam sterilization cycles. The combination of non-woven supports upstream of the membrane and an expanded net layer downstream provides increased protection and service life while guaranteeing zero fibre shedding into the process.
HIGH FLOW TETPOR II is suitable for all sterile gas applications including fermentation inlet and off-gas streams, venting, lyophilisers, autoclave vacuum breaks and blow-fill-seal equipment as well as the provision of particle-free air within the electronics industry.
Features and Benefits:
• Steam sterilizable up to 225 cycles at 142°C (287.6°F)
• Unrivalled flow rates combined with low pressure drops
• Fully validated to ASTM 838-05 for liquid bacterial challenge
• Fully validated to aerosol and viral challenge
• Integrity testable by all methods including water intrusion test
| Action | SKU | Availability | Price | For Fluid Type | Division | Application | Product Type | Brand | Industry | Materials of Construction | Specifications Met | Technology | Filter Material | Filter Construction | Pressure Differential | Micron Rating | Product Series | Division | Operating Temperature | Seal Material | Product Style | End Cap Configuration | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZHFT/AT-V | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.2 MICRON in Liquid | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 °C Maximum Inlet Air Temperature | Viton | Demi Cartridge | TRUESEAL | 5" (125 mm) | |
| ZHFT/AY | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 3.5 barg at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.2 MICRON in Liquid | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 °C Maximum Inlet Air Temperature | Silicone | Demi Cartridge | Demi MCY | 5" (125 mm) | |
| ZHFT/AZ | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 3.5 | 0.2 | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 | Silicone | Demi Cartridge | Demi A & B Std | 5" (125 mm) | |
| ZHFT/BT | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 3.5 | 0.2 | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 140.0 | Silicone | Demi Cartridge | TRUESEAL | 2.5" (65 mm) | |
| ZHFT/BT-E | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.2 MICRON in Liquid | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 140.0 °F Maximum Inlet Air Temperature | EPDM | Demi Cartridge | TRUESEAL | 2.5" (65 mm) | |
| ZHFT/BT-P | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.01 MICRON in Gas | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 140.0 °F Maximum Inlet Air Temperature | PTFE Encapsulated Silicone | Demi Cartridge | TRUESEAL | 2.5" (65 mm) | |
| ZHFT/BT-V | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 3.5 barg at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.2 MICRON in Liquid | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 °C Maximum Inlet Air Temperature | Viton | Demi Cartridge | TRUESEAL | 2.5" (65 mm) | |
| ZHFT/BY | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.01 MICRON in Gas | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 140.0 °F Maximum Inlet Air Temperature | Silicone | Demi Cartridge | Demi MCY | 2.5" (65 mm) | |
| ZHFT/BZ | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 3.5 | 0.2 | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 140.0 | Silicone | Demi Cartridge | Demi A & B Std | 2.5" (65 mm) | |
| ZHFT/BZ-E | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.01 MICRON in Gas | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 °C Maximum Inlet Air Temperature | EPDM | Demi Cartridge | Demi A & B Std | 2.5" (65 mm) | |
| ZHFT/BZ-V | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 3.5 barg at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.2 MICRON in Liquid | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 °C Maximum Inlet Air Temperature | Viton | Demi Cartridge | Demi A & B Std | 2.5" (65 mm) | |
| ZHFT/KC | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 3.5 | 0.2 | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 | Silicone | Cartridge | P-7 | 5" (125 mm) | |
| ZHFT/KC-E | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.2 MICRON in Liquid | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 140.0 °F Maximum Inlet Air Temperature | EPDM | Cartridge | P-7 | 5" (125 mm) | |
| ZHFT/KC-P | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.01 MICRON in Gas | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 140.0 °F Maximum Inlet Air Temperature | PTFE Encapsulated Silicone | Cartridge | P-7 | 5" (125 mm) | |
| ZHFT/KC-V | Backordered | POR | Air and Gas | Bioscience and Water Filtration Division | Sterile Gas and Vent Filtration | Air Filter Element | PARKER | Food & Beverage<br/>Pharmaceuticals | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: 316L Stainless Steel<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: Polysulphone<br/>Standa | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>Fully validated to aerosol and viral challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/>Validated by aerosol bacterial and MS-2 Coliphage challenge testing | Filtration | PTFE | Pleated | 50.76 psig at 60°C (140°F) Maximum Differential Pressure Outside-to-Inside. | 0.01 MICRON in Gas | HIGH FLOW TETPOR II | Bioscience and Water Filtration Division | 60.0 °C Maximum Inlet Air Temperature | Viton | Cartridge | P-7 | 5" (125 mm) |
REWARD Status
Interchange Lookup
Interchange Lookup
Your one-stop-shop for all your filtration, hydraulic, pneumatic, hose, fittings, coupling and other motion control products. Click here for the dedicated page for you cross-reference or replacement search that also shows availability and price.
Exact match Begins with Contains
