You have no items in your shopping cart.
- Availability & Price
- Search SKU
Filter by attributes
- Additional Options
- Additional Protection Included
- Allowable rotational torque
- Contact Rating
- Division
- Length
- Maximum Operating Voltage
- Media
- Operating Temperature
- Power Consumption
Level Switches- level measurement (JB, JC7, JD, JF, JRS Series)
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
A level switch is a device used to detect the level of substances such as liquid, chemical solvent, powders, lumps within tanks, silos, and hoppers. In addition, a level switch prevents overfilling of tanks and silos and ensures tanks do not run too low, possibly interrupting production.
JB Series - Features :
• A compact type product that can be easily maintained and repaired in small spaces
• Optimum for controlling powders and fine particles such as flour, wheat, sugar, and plastic materials
• Highly sensitive with buil-in springs that can be adjusted to four levels
JC7 Series - Features :
• Detection of the heights of stored goods
• Made with alumimum cases, these types can be installed and used outdorrs
• Customizatin with a various length of shaft
JD Series - Features :
• Easy handling and wiring
• Since the structure is simple, troubles occur rarely and maintenance is easy
JRS Series - Features :
• Detection balls and detection rods are completely enclosed and thus the products are not affected by pressure, vacuum, or gases
• The lead switch is enclosed in glass tube containing inert gas and thus the products operate safely in combustible gases
JF Series - Features :
• Used in small spaces and low flow rate tanks
• Applicable to water cooler/heater, coffee vending machines, medical appliances
Read More...JB Series - Features :
• A compact type product that can be easily maintained and repaired in small spaces
• Optimum for controlling powders and fine particles such as flour, wheat, sugar, and plastic materials
• Highly sensitive with buil-in springs that can be adjusted to four levels
JC7 Series - Features :
• Detection of the heights of stored goods
• Made with alumimum cases, these types can be installed and used outdorrs
• Customizatin with a various length of shaft
JD Series - Features :
• Easy handling and wiring
• Since the structure is simple, troubles occur rarely and maintenance is easy
JRS Series - Features :
• Detection balls and detection rods are completely enclosed and thus the products are not affected by pressure, vacuum, or gases
• The lead switch is enclosed in glass tube containing inert gas and thus the products operate safely in combustible gases
JF Series - Features :
• Used in small spaces and low flow rate tanks
• Applicable to water cooler/heater, coffee vending machines, medical appliances
| Action | SKU | Availability | Price | Division | Rated Speed | Contact Rating | Product Type | Operating Temperature | Allowable rotational torque | Power Consumption | Media | Maximum Operating Voltage | Series | Additional Options | Additional Protection Included | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| JB-SD-AC110V | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller | 0 to 60 : Under no freeze °C | 300 to 600 g/cm | 3 (When blad rotates) V/A | Power and granules | AC 110V (50Hz) | JB-SD | ||||
| JB-SD-AC220V | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller | 0 to 60 : Under no freeze °C | 300 to 600 g/cm | 3 (When blad rotates) V/A | Power and granules | AC 220V (60Hz) | JB-SD | ||||
| JC7-SD-AC110V | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller | 0 to 60 (0 to 120 Optional) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | NA | NA | |
| JC7-SD-AC110V 1000MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 1000 mm | |
| JC7-SD-AC110V 1200MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 1200 mm | |
| JC7-SD-AC110V 120MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 120 mm | |
| JC7-SD-AC110V 1500MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 1500 mm | |
| JC7-SD-AC110V 150MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 150 mm | |
| JC7-SD-AC110V 150MMP | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Protection Tube Attached | 150 mm | |
| JC7-SD-AC110V 1600MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 1600 mm | |
| JC7-SD-AC110V 1800MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 1800 mm | |
| JC7-SD-AC110V 180MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 180 mm | |
| JC7-SD-AC110V 2000MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 2000 mm | |
| JC7-SD-AC110V 200MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 200 mm | |
| JC7-SD-AC110V 200MMP | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Protection Tube Attached | 200 mm | |
| JC7-SD-AC110V 2500MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 2500 mm | |
| JC7-SD-AC110V 250MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 250 mm | |
| JC7-SD-AC110V 250MMP | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Protection Tube Attached | 250 mm | |
| JC7-SD-AC110V 270MMP | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Protection Tube Attached | 270 mm | |
| JC7-SD-AC110V 280MM | Backordered | POR | Motion Systems Division Korea | 6 RPM | 3 A AC250V | Propeller - Two wings | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 500 to 1000 g/cm | 3 (When blad rotates) V/A | Lumps | AC 110V (50Hz) | JC7-SD | Propeller - Two wings | Non | 280 mm |
REWARD Status
Interchange Lookup
Interchange Lookup
Your one-stop-shop for all your filtration, hydraulic, pneumatic, hose, fittings, coupling and other motion control products. Click here for the dedicated page for you cross-reference or replacement search that also shows availability and price.
Exact match Begins with Contains
