You have no items in your shopping cart.
- Availability & Price
- Search SKU
Filter by attributes
- Application
- Brand
- Connection Type
- Depth
- Division
- Division
- Drain
- Filter Type
- Height
- Industry
OIL-X Grade WS Compressed Air Water Separator (For Pressures Up To 16 barg)
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
Bulk water which exists in all compressed air systems causes problems - corrosion of piping, permanent damage to valves, cylinders, pneumatic tools, machinery and reducing the effectiveness of aftercoolers/heat exchangers.
Over 99% of bulk water can be easily and economically removed by installing a Parker OIL-X Grade WS high efficiency water separator. Now, your compressed air system will operate much more efficiently with reduced downtime and maintenance costs. Grade WS technology will also improve the effectiveness of aftercoolers, refrigerant dryers, filters and other downstream equipment.
Features
• The world’s most energy efficient water separators
• For the removal of bulk condensed water and liquid oil
• Used to protect coalescing filters from bulk liquid contamination
• Tested in accordance with ISO8573-9
Benefits
• High liquid removal efficiencies at all flow conditions
• Cost effective
• Low maintenance
• Very low differential pressure
• Removes rust and pipescale
In addition to protecting coalescing filters from bulk liquid contamination, Grade WS water separators can be used on compressor inter-cooler and after-cooler stages, wet air receivers and refrigeration dryers.
Sizing and Selection
Important Note: For quoted air purity performance, water separators must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.
For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
Read More...Over 99% of bulk water can be easily and economically removed by installing a Parker OIL-X Grade WS high efficiency water separator. Now, your compressed air system will operate much more efficiently with reduced downtime and maintenance costs. Grade WS technology will also improve the effectiveness of aftercoolers, refrigerant dryers, filters and other downstream equipment.
Features
• The world’s most energy efficient water separators
• For the removal of bulk condensed water and liquid oil
• Used to protect coalescing filters from bulk liquid contamination
• Tested in accordance with ISO8573-9
Benefits
• High liquid removal efficiencies at all flow conditions
• Cost effective
• Low maintenance
• Very low differential pressure
• Removes rust and pipescale
In addition to protecting coalescing filters from bulk liquid contamination, Grade WS water separators can be used on compressor inter-cooler and after-cooler stages, wet air receivers and refrigeration dryers.
Sizing and Selection
Important Note: For quoted air purity performance, water separators must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.
For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
| Action | SKU | Availability | Price | Depth | Height | Application | Product Series | Technology | Industry | Width | Materials of Construction | Pressure Differential | Weight | Micron Rating | Brand | Filter Type | Operating Temperature | Operating Pressure | Drain | Division | Product Type | Specifications Met | Division | Port Size | Connection Type | Maximum Flow Rate |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WSPX040HGFX | Backordered | POR | 6.18 inch | 532.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 164.0 mm | Die Cast Aluminium | 52.0 mbar Initial Saturated, 100% Flow | 15.14 lb | n/a | PARKER | Water Separator | 2 to 60 °C | 22 to 232 psig | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 2 inch | BSPP | 1260 m³/h @ 7 barg (742 cfm @ 102 psig) | |
| WSPX040HNFX | Backordered | POR | 157.0 mm | 532.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 6.46 inch | Die Cast Aluminium | 52.0 mbar Initial Saturated, 100% Flow | 15.14 lb | n/a | PARKER | Water Separator | 2 to 60 °C | 22 to 232 psig | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 2 inch | NPT | 1260 m³/h @ 7 barg (742 cfm @ 102 psig) | |
| WSPX045IGFX | Backordered | POR | 157.0 mm | 532.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 164.0 mm | Die Cast Aluminium | 0.8 psi Initial Saturated, 100% Flow | 6.87 kg | n/a | PARKER | Water Separator | 2 to 60 °C | 22 to 232 psig | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 2½ inch | BSPP | 1260 m³/h @ 7 barg (742 cfm @ 102 psig) | |
| WSPX045INFX | Backordered | POR | 157.0 mm | 532.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 6.46 inch | Die Cast Aluminium | 55.0 mbar Initial Saturated, 100% Flow | 6.87 kg | n/a | PARKER | Water Separator | 35 to 149 °F | 1.5 to 16 barg | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 2½ inch | NPT | 1260 m³/h @ 7 barg (742 cfm @ 102 psig) | |
| WSPX050IGFX | Backordered | POR | 183.0 mm | 654.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 192.0 mm | Die Cast Aluminium | 1.7 psi Initial Saturated, 100% Flow | 8.47 kg | n/a | PARKER | Water Separator | 35 to 149 °F | 1.5 to 16 barg | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 2½ inch | BSPP | 2880 m³/h @ 7 barg (1695 cfm @ 102 psig) | |
| WSPX050INFX | Backordered | POR | 183.0 mm | 654.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 192.0 mm | Die Cast Aluminium | 1.7 psi Initial Saturated, 100% Flow | 18.66 lb | n/a | PARKER | Water Separator | 2 to 60 °C | 1.5 to 16 barg | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 2½ inch | NPT | 2880 m³/h @ 7 barg (1695 cfm @ 102 psig) | |
| WSPX055JGFX | Backordered | POR | 7.2 inch | 33.23 inch | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 192.0 mm | Die Cast Aluminium | 1.6 psi Initial Saturated, 100% Flow | 18.66 lb | n/a | PARKER | Water Separator | 35 to 149 °F | 1.5 to 16 barg | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 3 inch | BSPP | 2880 m³/h @ 7 barg (1695 cfm @ 102 psig) | |
| WSPX055JNFX | Backordered | POR | 7.2 inch | 844.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 7.56 inch | Die Cast Aluminium | 111.0 mbar Initial Saturated, 100% Flow | 8.47 kg | n/a | PARKER | Water Separator | 35 to 149 °F | 22 to 232 psig | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 3 inch | NPT | 2880 m³/h @ 7 barg (1695 cfm @ 102 psig) | |
| WSPX060KGFX | Backordered | POR | 282.0 mm | 33.3 inch | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 16.54 inch | Die Cast Aluminium | 48.0 mbar Initial Saturated, 100% Flow | 44.50 kg | n/a | PARKER | Water Separator | 2 to 60 °C | 1 to 16 barg | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 4 inch | BSPP | 3600 m³/h @ 7 barg (2119 cfm @ 102 psig) | |
| WSPX060KNFX | Backordered | POR | 11.10 inch | 847.0 mm | Compressed Air and Nitrogen Gas Applications | OIL-X Grade WS | Filtration | Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental | 16.54 inch | Die Cast Aluminium | 48.0 mbar Initial Saturated, 100% Flow | 44.50 kg | n/a | PARKER | Water Separator | 35 to 149 °F | 2 to 16 barg | Automatic Float | Gas Separation and Filtration Division EMEA | Compressed Air Filter | Fully tested - In accordance with ISO12500-4 & ISO8573-9 for liquid water. <br/><br/>Separation performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II | Gas Separation and Filtration Division EMEA | 4 inch | NPT | 3600 m³/h @ 7 barg (2119 cfm @ 102 psig) |
REWARD Status
Interchange Lookup
Interchange Lookup
Your one-stop-shop for all your filtration, hydraulic, pneumatic, hose, fittings, coupling and other motion control products. Click here for the dedicated page for you cross-reference or replacement search that also shows availability and price.
Exact match Begins with Contains
