PXM Pilot Exhaust Module / Pneumatic Division Europe

The PXM Pilot Exhaust module provides an enhanced level of safety by enabling an H Series HA Valve to control the pilot pressure to other externally piloted H Series ISO valves on the same manifold. This product is designed to mount under an HA valve product as a sandwich accessory. The PXM module removes the pilot pressure to all remaining valves (regardless of size) either on the manifold or within a specific zone while maintaining main supply pressure. This module can be ordered as standard (no sensing), mechanical (with pressure switch) or electrical (with solid state pressure sensor).

Markets:
• General Industrial
• Packaging
• Automotive

Features/Benefits:
For use when loss of main valve pressure causes a safety or quality concern, the PXM creates a pneumatically controlled safety zone without removal of the PLC’s electrical signals or main supply pressure to the zoned valves.

Enhanced Control is achieved by ordering your valve manifold with externally piloted valves and using the PXM to turn pilot air off (exhausts pilot pressure) or on (pilot is pressurized) as needed.
Additional Safety Control is created when pilot pressure controls the operational shut down of several valves in one zone or an entire manifold.

PXM offers design flexibility – by controlling the pilot pressure, the other valves within the zone transition to known states:
• 5/2 Single Solenoid valves (with mechanical spring) will shift back to “home position”
• 5/2 Double Solenoid valves will stay in the “last state”
• 5/3 Double Solenoid valves will shift to the “center position”
o All ports blocked
o Center Exhaust
o Pressure Center

Maintenance Flexibility with 5/3 Center Exhaust valves. In a de-piloted state, components downstream of the valve are depressurized and can be serviced without removal of manifold supply pressure.

Applications:
• Pneumatic valves requiring maintained supply pressure during stop or maintenance
• Allows valves to return to their safe state while maintaining supply pressure in the manifold

Conforms to:
This product is not safety rated but can conform to safe machine design as a part of a control circuit.
Consult local and International standards such as The Machinery Directive and standards EN ISO 13849-1 and EN ISO 13849-2 for Safety Related Parts of a Control Circuit. SRP/CS