You have no items in your shopping cart.
- Availability & Price
- Search SKU
Filter by attributes
- Application
- Brand
- Configuration
- Division
- Division
- End Cap Configuration
- Filter Area
- Filter Construction
- Filter Material
- For Fluid Type
Sterilizing Grade Air and Gas Filters - TETPOR AIR
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
Operating at ambient temperature conditions, TETPOR AIR filters provide a cost-effective filtration solution. A unique polypropylene prefilter layer extends service life in heavily contaminated environments.
TETPOR Air filter cartridges utilize a well-proven inherently hydrophobic expanded PTFE membrane validated as sterilizing grade in liquid in accordance with ASTM F838-05. This ensures the removal of all airborne bacteria, viruses and bacteriophage.
Features and Benefits
• Assured biosecurity with absolute rated filtration
• High flow rates with low pressure drops
• High voids volume PTFE membrane
• Steam sterilizable to 140°C (287.6°F)
Read More...TETPOR Air filter cartridges utilize a well-proven inherently hydrophobic expanded PTFE membrane validated as sterilizing grade in liquid in accordance with ASTM F838-05. This ensures the removal of all airborne bacteria, viruses and bacteriophage.
Features and Benefits
• Assured biosecurity with absolute rated filtration
• High flow rates with low pressure drops
• High voids volume PTFE membrane
• Steam sterilizable to 140°C (287.6°F)
| Action | SKU | Availability | Price | Brand | Technology | Filter Construction | Industry | Division | Division | Operating Temperature | Product Type | For Fluid Type | Application | Micron Rating | Product Series | Filter Material | Specifications Met | Materials of Construction | Filter Area | Seal Material | Length | End Cap Configuration | Configuration | Inlet Connection Size | Outlet Connection Size | Product Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZCMT1/020B-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | EPDM | 10" (250 mm) | dh DOE | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020C-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Silicone | 10" (250 mm) | BF / 226 Bayonet | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020C-AE | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | EPDM | 10" (250 mm) | BF / 226 Bayonet | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020C-AP | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | PTFE Encapsulated Silicone | 10" (250 mm) | BF / 226 Bayonet | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020C-AV | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Viton | 10" (250 mm) | BF / 226 Bayonet | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020D-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Silicone | 10" (250 mm) | Fin / 222 | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020E-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Silicone | 10" (250 mm) | Flat Top / 222 | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020E-AE | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | EPDM | 10" (250 mm) | Flat Top / 222 | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020F-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 24.84 ft2 | Silicone | 10" (250 mm) | BF / 216 / 218 | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020G-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | Silicone | 10" (250 mm) | Recess / 222 | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020H-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Silicone | 10" (250 mm) | UF Retrofit | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020J-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | PTFE Encapsulated Silicone | 10" (250 mm) | SOE | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020N-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | Silicone | 10" (250 mm) | 213 (Internal) | N/A | n/a | n/a | Cartridge | |
| ZCMT1/020R-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Silicone | 10" (250 mm) | BF / 222 Bayonet | N/A | n/a | n/a | Cartridge | |
| ZCMT1-020A-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | Silicone | 10" (250 mm) | 223 | N/A | n/a | n/a | Cartridge | |
| ZCMT1-020B-AS | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | Silicone | 10" (250 mm) | dh DOE | N/A | n/a | n/a | Cartridge | |
| ZCMT1-020C-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | Silicone | 10" (250 mm) | BF / 226 Bayonet | N/A | n/a | n/a | Cartridge | |
| ZCMT1-020C-AS | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 0.77 m² | Silicone | 10" (250 mm) | BF / 226 Bayonet | N/A | n/a | n/a | Cartridge | |
| ZCMT1-020E-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Continuous: 60°C (140°F)<br/> | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Silicone | 10" (250 mm) | Flat Top / 222 | N/A | n/a | n/a | Cartridge | |
| ZCMT1-020F-A | Backordered | POR | PARKER | Filtration | Pleated | Pharmaceuticals | Bioscience and Water Filtration Division | Bioscience and Water Filtration Division | Higher short-term temperatures during CIP to the following:<br/>Up to 20°C (68°F) @ 5.0 barg (72.5 psig)<br/>Up to 40°C (104°F) @ 4.0 barg (58.0 psig)<br/>Up to 60°C (140°F) @ 3.0 barg (43.5 psig)<br/>Up to 80°C (176°F) @ 2.0 barg (29.0 psig)<br/ | Air Filter Element | Air and Gas | Sterile Gas and Vent Filtration | 0.2 MICRON | TETPOR AIR | PTFE | Fully validated to ASTM F838-05 liquid bacterial challenge<br/>FDA 21 CFR part 177<br/>USP Plastics Class VI - 121°C<br/> | Filtration Media: PTFE<br/>Upstream Support: Polypropylene<br/>Downstream Support: Polypropylene<br/>Inner Support Core: Polypropylene<br/>Outer Protection Cage: Polypropylene<br/>End Caps: Polypropylene<br/>End Cap Insert: 316L Stainless Steel<br/>Stand | 8.28 ft2 | Silicone | 10" (250 mm) | BF / 216 / 218 | N/A | n/a | n/a | Cartridge |
REWARD Status
Interchange Lookup
Interchange Lookup
Your one-stop-shop for all your filtration, hydraulic, pneumatic, hose, fittings, coupling and other motion control products. Click here for the dedicated page for you cross-reference or replacement search that also shows availability and price.
Exact match Begins with Contains
