You have no items in your shopping cart.
- Availability & Price
- Search SKU
Filter by attributes
- Additional Options
- Additional Protection Included
- Allowable rotational torque
- Contact Rating
- Division
- Length
- Maximum Operating Voltage
- Media
- Operating Temperature
- Power Consumption
Level Switches- level measurement (JB, JC7, JD, JF, JRS Series)
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
A level switch is a device used to detect the level of substances such as liquid, chemical solvent, powders, lumps within tanks, silos, and hoppers. In addition, a level switch prevents overfilling of tanks and silos and ensures tanks do not run too low, possibly interrupting production.
JB Series - Features :
• A compact type product that can be easily maintained and repaired in small spaces
• Optimum for controlling powders and fine particles such as flour, wheat, sugar, and plastic materials
• Highly sensitive with buil-in springs that can be adjusted to four levels
JC7 Series - Features :
• Detection of the heights of stored goods
• Made with alumimum cases, these types can be installed and used outdorrs
• Customizatin with a various length of shaft
JD Series - Features :
• Easy handling and wiring
• Since the structure is simple, troubles occur rarely and maintenance is easy
JRS Series - Features :
• Detection balls and detection rods are completely enclosed and thus the products are not affected by pressure, vacuum, or gases
• The lead switch is enclosed in glass tube containing inert gas and thus the products operate safely in combustible gases
JF Series - Features :
• Used in small spaces and low flow rate tanks
• Applicable to water cooler/heater, coffee vending machines, medical appliances
Read More...JB Series - Features :
• A compact type product that can be easily maintained and repaired in small spaces
• Optimum for controlling powders and fine particles such as flour, wheat, sugar, and plastic materials
• Highly sensitive with buil-in springs that can be adjusted to four levels
JC7 Series - Features :
• Detection of the heights of stored goods
• Made with alumimum cases, these types can be installed and used outdorrs
• Customizatin with a various length of shaft
JD Series - Features :
• Easy handling and wiring
• Since the structure is simple, troubles occur rarely and maintenance is easy
JRS Series - Features :
• Detection balls and detection rods are completely enclosed and thus the products are not affected by pressure, vacuum, or gases
• The lead switch is enclosed in glass tube containing inert gas and thus the products operate safely in combustible gases
JF Series - Features :
• Used in small spaces and low flow rate tanks
• Applicable to water cooler/heater, coffee vending machines, medical appliances
| Action | SKU | Availability | Price | Division | Allowable rotational torque | Media | Operating Temperature | Contact Rating | Rated Speed | Product Type | Power Consumption | Maximum Operating Voltage | Additional Protection Included | Additional Options | Series | Length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| JC7-ST-AC220V 260MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 260 mm | |
| JC7-ST-AC220V 260MMP | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Protection Tube Attached | Propeller - Half wing (for heat resistance) | JC7-ST | 260 mm | |
| JC7-ST-AC220V 300MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 300 mm | |
| JC7-ST-AC220V 300MMP | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Protection Tube Attached | Propeller - Half wing (for heat resistance) | JC7-ST | 300 mm | |
| JC7-ST-AC220V 309MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 309 mm | |
| JC7-ST-AC220V 309MMP | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Protection Tube Attached | Propeller - Half wing (for heat resistance) | JC7-ST | 309 mm | |
| JC7-ST-AC220V 310MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 310 mm | |
| JC7-ST-AC220V 315MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 315 mm | |
| JC7-ST-AC220V 350MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 350 mm | |
| JC7-ST-AC220V 350MMP | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Protection Tube Attached | Propeller - Half wing (for heat resistance) | JC7-ST | 350 mm | |
| JC7-ST-AC220V 380MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 380 mm | |
| JC7-ST-AC220V 400MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 400 mm | |
| JC7-ST-AC220V 410MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 410 mm | |
| JC7-ST-AC220V 420MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 420 mm | |
| JC7-ST-AC220V 430MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 430 mm | |
| JC7-ST-AC220V 435MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 435 mm | |
| JC7-ST-AC220V 450MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 450 mm | |
| JC7-ST-AC220V 480MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 480 mm | |
| JC7-ST-AC220V 500MM | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Lumps | 0 to 60 STANDARD (0 to 120 HEAT-RESISTANT) °C | 3 A AC250V | 6 RPM | Propeller - Half wing (for heat resistance) | 3 (When blad rotates) V/A | AC 220V (60Hz) | Non | Propeller - Half wing (for heat resistance) | JC7-ST | 500 mm | |
| JD-100 | Backordered | POR | Motion Systems Division Korea | 500 to 1000 g/cm | Power and granules | 0 to 60 : Under no freeze °C | AC 250V 5A and DC125V 0.5A | n/a | Diaphragm | n/a V/A | n/a | JD-100 |
REWARD Status
Interchange Lookup
Interchange Lookup
Your one-stop-shop for all your filtration, hydraulic, pneumatic, hose, fittings, coupling and other motion control products. Click here for the dedicated page for you cross-reference or replacement search that also shows availability and price.
Exact match Begins with Contains
