OIL-X 'Point Of Use' Oil Vapour Reduction Filters

*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.

Oil vapour is oil in a gaseous form and will pass straight through coalescing filters which are designed to remove liquid oil and oil aerosols, Parker recommend activated carbon adsorption filter technology to reduce oil vapour.

OIL-X 'point of use' oil vapour reduction filters are available in two options: the Grade ACS single stage adsorption filter and Grade AC double stage filter - Grade AC consists of both coalescing and adsorption filter elements combined into one housing. OIL-X Grades ACS and AC are used for smaller flow rate applications and applications where more frequent element changes can be tolerated.

Features/Benefits
• High efficiency 'point of use' filters
• Protects downstream equipment and processes
• Provides high quality, clean, oil free compressed air to international standards
• Reduced cost of ownership
• Enhanced health and safety
• Suitable for all types of air compressor and compatible with all compressor lubricants
• Manufactured in accordance with ISO9001

Sizing and Selection
Important Note: For quoted air purity performance, compressed air filters must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

Please note: The lifetime of the activated carbon material can vary and is dependent on the contamination type and quantity and also on the humidity of the compressed air.

Sort by

Display per page

Action	SKU	Availability	Price	Brand	Technology	Division	Industry	Application	Division	Element Change Interval	Micron Rating	Width	Product Type	Operating Pressure	Materials of Construction	Depth	Weight	Product Series	Filter Type	Specifications Met	Residual Oil Content	Height	Compatible Element	Operating Temperature	Pressure Differential	Connection Type	Drain	Port Size	Maximum Flow Rate	Filter Stages
	ACSPX060KGMX	Backordered	POR	PARKER	Filtration	Gas Separation and Filtration Division EMEA	Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental	Compressed Air and Nitrogen Gas Applications	Gas Separation and Filtration Division EMEA	When Oil Vapour is detected	n/a	420.0 mm	Compressed Air Filter	1 to 20 barg	Die Cast Aluminium	11.10 inch	44.50 kg	OIL-X Grades ACS and AC	Oil Vapour Reduction	Fully tested - In accordance with ISO8573-5<br/><br/>Filtration performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II	0.003 mg/m³ / 0.003 ppm(w) <br/>@ 21°C (70°F)	33.3 inch	P060ACS	35 to 122 °F	1.2 psi Initial Dry, 100% Flow	BSPP	Manual	4 inch	3600 m³/h @ 7 barg (2119 cfm @ 102 psig)	Single Stage
	ACSPX060KNMX	Backordered	POR	PARKER	Filtration	Gas Separation and Filtration Division EMEA	Industrial Manufacturing Equipment<br/> Food & Beverage<br/> Automotive<br/> Electronics<br/> Pharmaceuticals<br/> Medical & Dental	Compressed Air and Nitrogen Gas Applications	Gas Separation and Filtration Division EMEA	When Oil Vapour is detected	n/a	16.54 inch	Compressed Air Filter	1 to 20 barg	Die Cast Aluminium	11.10 inch	98.11 lb	OIL-X Grades ACS and AC	Oil Vapour Reduction	Fully tested - In accordance with ISO8573-5<br/><br/>Filtration performance independently validated - by Lloyds Register.<br/><br/>PED 2014/68/EU Fluid Group II	0.003 mg/m³ / 0.003 ppm(w) <br/>@ 21°C (70°F)	33.3 inch	P060ACS	2 to 50 °C	< 85 mbar Initial Dry, 100% Flow	NPT	Manual	4 inch	3600 m³/h @ 7 barg (2119 cfm @ 102 psig)	Single Stage

OIL-X 'Point Of Use' Oil Vapour Reduction Filters

Interchange Lookup